The Trimode™ tube distortion takes you from slight overdrive to full-on distortion. Think Mesa-Boogie in a pedal and switch instantly from rhythm to lead.Classic-V9
The Tonebone Classic-V9™ is an ultra-responsive distortion pedal that lets you precisely adjust and focus the intensity of the distortion to suit your playing style and develop your own musical voice.Hollywood
The Hollywood is a dual-mode distortion that delivers everything from slight overdrive to super-saturated solos. Think of it as a solid state version of the famous Tonebone Classic.Plexitube
The Plexitube™ delivers five generations of Marshall in a box. Triple gain stage delivers fat, harmonically rich tones that let you switch from rhythm to lead.Hot British
The Tonebone Hot British™ delivers five decades of brute power for everything from scooped-out chunky rhythm to screaming sizzling hot lead tones.London
The London is a super compact Marshall in a box. Features super rich, fat tones and dual-mode operation to seemlessly switch between rhythm and lead for soloing.Texas
The Texas delivers three generations of overdrive in a single pedal. Select between a vintage TS9, OCD or super-modified OVD for extra rip. Dual-mode lets you switch from rhythm to lead.Regency
The Regency™ is a new type of pedal designed specifically to pre-emphasize the gain stage of today's high gain amps.
The Vienna Chorus™ is vintage bucket-brigade chorus that delivers old-school analog tone. Dual-mode controls lets you switch from slow to fast choral effects like a Leslie.Vocoloco
The Voco-Loco™ is a foot-controlled effects loop that enables the lead vocalist, sax or trumpet player to incorporate guitar effects pedals into the signal path, just like an electric guitarist adds effects for soloing.MIX-BLENDER
The Mix-Blender™ is a multi-function pedal that lets you mix two instruments or effects together and then send the combined signal through a mixer-style effects loop for processing.
The Switchbone V2™ may well be the ultimate ABY/C guitar amp switcher. This device lets you switch and combine up to three guitar amplifiers without introducing distortion, switching noise or hum into the signal path.Loopbone
The Loopbone™ is a high-performance effects-loop switcher that enables the guitarist to insert, remove and combine pedals via two independent signal chainsHeadbone
The Headbone™ is a specially designed switching device that lets you toggle between two different guitar amplifier heads using a single speaker cabinet.Twin-City
The Twin-City™ is a class-A ABY switcher with Drag Control that delivers your guitar tone without introducing harsh sounding artifacts. Ground isolated to eliminate hum and buzz from gournd loops.MIX-BLENDER
The Mix-Blender™ is a multi-function pedal that lets you mix two instruments or effects together and then send the combined signal through a mixer-style effects loop for processing.Cabbone
The Cabbone™ lets you switch between two speaker cabinets using a single amplifier head. You will not believe how changing the cabinet can affect your tone!BigShot ABY
The Radial BigShot ABY™ is a compact ABY switcher that enables you to either switch between two amplifiers or combine the signal when you want both amps to play at the same time.BigShot EFX
The BigShot EFX™ is a true-bypass effects loop switcher that lets you set up two separate effects loops and insert them into your pedal chain at will.BigShot IO
The Radial BigShot i/o™ is an easy to use instrument selector that lets you quickly transition between any two instruments and send out the output signal to your amp.BigShot SW2
The BigShot SW2™ is a two channel universal remote control that can be used to replace the two amplifier foot switches and combine their main functions with a single pedal.PZ-Select
The Tonebone PZ-Select™ is a unique pedal designed to work with today's new breed of electric guitars and basses that employ both magnetic and piezo pickups.Twinline
The Radial Twinline™ is a unique device that enables a guitarist to share effects pedals between two amps when using the amplifiers' built-in (rear-panel) effects loops.Headlight
The Headlight™ is a unity gain guitar amp selector designed to easily integrate on a pedalboard and allow the artist to seamlessly switch between as many as four amps using a single footswitch.
- PREAMPS & BUFFERSPZ-Pre
The PZ-Pre™ is a power-packed preamp that lets you switch between two acoustic instruments and feed the PA with a built-in Radial direct box. Piezo optimized for orchestral instruments.PZ-Deluxe™
The PZ-Deluxe™ is a studio quality instrument preamp that jam-packs a full array of features into a compact pedal for live stage use. Ideal for all acoustic instruments.Bassbone OD
The Bassbone OD™ is a bass preamp with two instrument input channels, each of which is fully equipped with a level control, super powerful passive-interactive EQ and a low frequency filter to help eliminate resonance.PZ-Select
The Tonebone PZ-Select™ is a unique pedal designed to work with today's new breed of electric guitars and basses that employ both magnetic and piezo pickups.Dragster
The Dragster™ is a super-compact load correction device that lets you adjust the load on your electric guitar pickup to make your instrument sound natural in the PA or when recording.Bassbone V2
The Bassbone V2™ is a power-packed bass preamp that combines on-stage efficiency, amazing tonal control and superb audio performance in a compact box. This makes it the ideal front end for both live and studio recording.ELEVATOR
The Elevator™ is a unique class-A multi-level power booster and buffer that provides the guitarist with a degree of customization to better match their playing style.BigShot PB1
The BigShot PB1™ is an ultra clean 100% discrete class-A power booster with Drag Control load correction and switchable mid-range boost. Likely the best power booster ever made.Stagebug SB-15
The Radial Stage Bug SB-15™ High Performance Signal Buffer lets you drive guitar pedals without added noise and also powers 15V Tonebone pedals.SHOTGUN
The Shotgun™ is a compact guitar-level signal buffer designed to drive up to four amplifiers simultaneously and fit nicely on any pedalboard.MIX-BLENDER
The Mix-Blender™ is a multi-function pedal that lets you mix two instruments or effects together and then send the combined signal through a mixer-style effects loop for processing.BUMPER
The Bumper™ is a unity gain instrument selector that lets you connect up to four instruments and progressively advance through each input using a sequential footswitch.
PZ-Select two channel instrument switcher
- Switch between piezo and magnetic pickups instantly
- Separate outputs for stage amps and PA system
- Drag control load correction for natural electric tone
- Perfect switcher for those that use electric & acoustic on stage
The Radial PZ-Select is a feature-packed signal switcher designed to work with today's new breed of hybrid electric guitars and basses that employ both magnetic and piezo pickups. It is also perfectly suited for players that need to switch between electric and acoustic instruments and send separate signals to the on-stage amps and PA system.
The design begins with two separate channels: The first is dedicated for electric guitar - the second is optimized for acoustic. Two easy access footswitches allow the artist to effortlessly select between pickups for a seamless performance on stage. The magnetic-electric pickup channel features Radial's award winning class-A buffer for absolute signal integrity. This is augmented with Drag Control (TM) load correction to counter the effect of the buffer for a more natural tone. The piezo-acoustic channel features an ultra-high 10meg-Ohm impedance that at once broadens the frequency response while smoothing out the peaks and edginess that often plagues these transducers. A built-in 3-position high-pass (low cut) filter helps eliminate excessive bottom end which could cause the sound to be muddy and indistinct. When used with an acoustic instrument, the filter works with the 180 deg polarity reverse to help eliminate resonant feedback. A low-pass (high-cut) filter has been included to help warm the sound of active piezo systems that can often sound harsh.
There are two outputs to choose from: A standard ¼" output to feed a stage amp and a built-in Radial DI box to deliver the piezo-acoustic tone direct to the PA system via a low-Z balanced XLR out. A dedicated effects loop on the piezo channel lets you connect a series of pedals to feed both outputs. Selecting channels is simply a matter of depressing the associated footswitch. Bright full-sized LEDs provide visual clarity under stage lights to show the selected channel. Even when off, the signal from both pickups are combined and sent to the dedicated tuner out for quiet on stage adjustments.
The PZ-Select... a powerful switcher that lets you seamlessly select pickups and instruments using the power of your feet!BIGSHOT I/O
True Bypass Instrument SelectorElevator
Connect your guitar using a ¼" TRS stereo cable and use the PZ-Select to switch between electric and acoustic. Add separate effects for each signal path and send the signals to separate amps or the PA for optimum tone.
Seamlessly switch from your electric bass to your upright with dedicated channels for each and send the signals to your two amps, PA and tuner! The ultra high-Z impedance on the piezo input will maximise your tone for the upright.
- PREAMPS & BUFFERS