Back button
  » Product details
» Product FAQ
» User manual pdf
» Product sheet pdf
» Press & images
 
Radial home klinkSite map linkContact link
BigShot PB1 class-A power booster


Radial BigShot PB1 - order # R800 7220
Suggested retail: $180 USD
Fully variable class-A power booster for solos
Buffer drives multiple pedals and long cables
Drag™ control load correction for natural tone
Ultra linear performance for natural boost
Compact and easy to use – great for pedalboards
 
The Radial BigShot PB1 is a combination power booster and buffer designed to provide exceptional sonic performance for pedalboard users in a compact and simple package. It provides 15dB of boost, accessed using a guitar pick via a rear-mounted recessed control that is protected from foot stomp damage.

Unlike class-B preamps found in most pedals that color the tone and give buffers a bad name, the BigShot PB1 features 100% discreet class-A circuit topology for the utmost in sound quality. Class-A circuits are preferred due to reduced zero cross distortion, improved phase response and the resulting smooth Bessel curve of evenly cascading harmonics. This is augmented with Drag™ control, a variable load correction circuit that lets you dial in the perfect impedance to match the original tone and feel of your guitar and amp combination.

With the PB1, noise is reduced while performance is augmented. Long cable runs are finally possible. And when you hit the boost, you get smooth clean control like you never though possible. The BigShot PB1 is likely the finest guitar power booster ever made.

 

BigShot™ PB1 - class-A power booster:
Straight ahead power booster for soloing or preamp overdrive. A Vintage Guitar magazine reviewer called the Radial VariBoost™ circuit 'the best sounding booster I have ever heard'.

In this setup:

• Guitar goes into the PB1's INPUT jack
• PB1 'OUTPUT' jack connects to amp input
• Adjust the 'DRAG' and 'GAIN' controls to suit


 

BigShot™ PB1 - buffer with Drag™ control:
Drive all your effects without having them suck the life out of your guitar tone. Drag™ control lets you regain the correct amount of pickup loading.

In this setup:

• Guitar goes into the PB1's INPUT jack
• PB1 'OUTPUT' jack connects to effects chain input
• Adjust the 'DRAG' and 'GAIN' controls to suit


 

BigShot™ PB1 - buffer combo with BigShot EFX:
Here, a BigShot EFX is added to switch in the effects as needed or mute the guitar signal for tuning. The PB1 drives the effects chain and the Drag™ control gives you back the tone you loose wih incorrect pickup loading.

In this setup:

• Guitar goes into the PB1's INPUT jack
• PB1 output to BigShot EFX input
• EFX send/receive to effects loop and tuner