Back button
  » Product details
» Product FAQ
» User manual pdf
» Product sheet pdf
» Press & images
 
Radial home klinkSite map linkContact link
BigShot™ SW2 - Slingshot™ remote control


Radial BigShot SW2 - order # R800 7210
Suggested retail: $180 USD
Universal foot switch for two amps or devices
Link feature to switch both amps at same time
Latching or pulse output to work with all amps
Switches other Slingshot™ equipped devices
Ultra compact–great for pedalboard use
 
The BigShot SW2 is a two channel universal remote control that can be used to replace two amplifier foot switches and combine their main functions with a single pedal. This is of primary importance for pedalboard users that always find themselves short on space. Both latching and pulse outputs are supported enabling the SW2 to control both older amps with contact closure style channel switching and newer amps with electronic pulse sensing. These options are augmented by the 'LINK' function that can gang both remote commands onto either foot switch. This could, for instance, switch both amp channels in a stereo rig from a clean rhythm to a distorted lead channel with one single foot stomp. No tap dancing!

For Tonebone pedal users, the SW2 provides a compact Slingshot™ remote switching controller that can be used to remotely switch amp heads ( Headbone ) or speaker cabinets ( Cabbone ). When combined with guitar amps, the switching capabilities are huge!

The SW2 – the world’s first universal remote switcher!
 

BigShot SW2 - switching channels and reverb:
Each of the SW2's footswitches can be set to remotely any amp's on-board features such as reverb, tremolo or amp channels.

In this setup:

• SW2's R-2 jack connects to reverb switch jack on one amp.
• R-1 jack connects to channel switching on the other amp
• Set Pulse/Latch and Closed/Open switches for each amp as required

 

BigShot SW2 - Slingshot™ with Headbone™:
The SW2 can be used as a remote switch with the Radial Headbone to switch amp heads. Change amp channels with the other footswitch for added tonal range!

In this setup:

• Headbone's Slingshot input connects to SW2's R-2 jack
• Amp channel switch jack connects to SW2's R-1 jack
• LED indicators show amp and switch status at a glance

 

BigShot SW2 - linked switching 2 features:
Here, a BigShot SW2 is set up to switch two features on different amps with one foot press! In this case the chorus on one amp and the reverb on another are switched, either one on the other off, or both on or off.

In this setup:

• Reverb jack on one amp to SW2's R-1 jack, chorus to SW2's R-2 jack
• BigShot 'LINK switch set to 'R1 to R2' position, pulse/latch as required
• Press R-2 footswitch to change both amp features at once
Email: info@radialeng.com<< Back | Top | Next >>  ©2006 JP Cabletek Electronics Ltd.