 |
"Having
the Loopbone in my pedalboard makes everything easier.
"
~ Audley Freed
(Black Crowes)
|
|
|
|
|
|
|
|  |
|
 |
 Master
control for pedal boards
Two
separate effects loops plus SlingShot™ remote
Exclusive
Drag™ control pickup load correction
|
|
|
 |
Built-in
VariBoost™ variable gain power boost circuit
Class-A
circuit for highest quality audio
Take control of your pedalboard! The Loopbone
is a compact, easy to use switcher that allows the
guitar player to insert, remove and combine two
effect pedal chains with footswitch ease. This is
particularly advantageous when using older pedals
that can add noise and load problems while in the
signal chain. As well, the Loopbone incorporates
Radial's superb VariBoost™ variable gain power
booster for a clean signal increase or as post-effects
boost for soloing.
To ensure the natural tone of your instrument is
maintained, no signal degrading op-amps or chips
are used – only 100% discreet components and
our highly acclaimed Class-A circuit, which combine
to achieve Radial's trademark transparency and exceptional
dynamics. The Loopbone also features Radial's unique
Drag™ control pickup load correction circuit
that allows the restoration of a proper 'amplifier'
impedance load which is lost when you plug a guitar
into effect pedals or other buffered devices. In
addition, the Loopbone brings even more to your
pedalboard – a separate 'always-on' tuner
out circuit that allows 'on-the-fly' tuning without
adding noise or load and perhaps the most innovative
feature of all, Slingshot™ remote switching.
Slingshot allows switching of amp channels or other
features, even other devices such as the Radial
Headbone or Cabbone
switchers, from the Loopbone. Check out 'The
Power of Slingshot' for details. |
|
|
|
Loopbone
- order # R800 7078
|
|
| Suggested
retail: $350 USD |
|
|
|
  |
 |
 |
Loopbone
Setup:
Plug your guitar
into the input and your effects chains into the
LOOP-1 SEND and RECEIVE and LOOP-2 SEND and RECEIVE
jacks using standard 1/4" guitar cables. Radial's
innovative 'Drag™ control adjusts to correct
the pickup loading so your guitar can sound exactly
like it does plugged straight into the amp. The
always-on tuner out is buffered so it can't interact
with the guitar signal going to the amps. The SlingShot™remote
switching output uses a standard 1/4" guitar
cord to switch channels, reverb on other features
on your amp or other devices, such as Radial's Headbone
or Cabbone switchers. |
|
|
 |
|
|
|
