Circuit
type: |
 |
Proprietary
class-A active circuit |
| Magnetic
input impedance: |
|
22kOhm to 1MegOhm with Drag™ control variable input impedance |
| Piezo
input impedance: |
|
10meg
Ohm at input jack |
Magnetic output: |
|
¼" Phone unbalanced, 10k Ohm output impedance |
Piezo output: |
|
¼" Phone unbalanced, 10k Ohm output impedance |
Tuner output: |
|
Buffered ¼" Phone unbalanced, 10k Ohm output impedance |
XLR DI output: |
|
Balanced 600 ohm mic-level (AES standard - pin-1 gnd, pin-2 hot [+], pin-3 cold [-]
) |
EQ: |
|
Low-cut - 3 position switch |
High-cut - 3 position switch |
|
|
Position a: off
Position b: 75Hz (6dB slope)
Position c: 220Hz (6dB slope)
|
Position a: off
Position b: 2.8kHz (6dB slope)
Position c: 7.2kHz (6dB slope) |
|
Grounding options: |
|
Ground lift at ¼” piezo stage amp output
Pin-1 ground lift at XLR-M output for PA system |
| Effects
send & receive: |
|
-10dB |
| FX loop impedance: |
|
Send:
1k Ohm
Receive: 15k Ohm |
| Polarity: |
|
180°
switch (absolute phase reversal) |
| Connections: |
|
Input-1:
¼" unbalanced
Input-2: ¼" unbalanced
Insert Send/Receive: ¼" unbalanced
Amp output: ¼"unbalanced, Hi-Z,
1k Ohm
Tuner output: ¼"unbalanced, Hi-Z,
6.8k Ohm
Pre-EQ output: XLR balanced mic level 600
Ohms
Post-EQ output: XLR balanced mic level 600
Ohms |
| Footswitches: |
|
Electric (magnetic) pn-off toggle
Acoustic (piezo)
on-off toggle |
| LED
indicators: |
|
Large
3mm ultra-bright LED on-off indicators
for
both electric and piezo channels |
Construction: |
|
14
gauge steel, baked enamel finish |
Size: |
|
6"w
x 3.875"d x 2"h (152 x 98
x 51mm) |
Weight: |
|
1.75lbs
(.8kg)
|
| Warranty |
|
Radial
3-year limited transferable warranty |
|
PZ-DI Features and Specifications
